unRAID NAS Server Pro 6.10.2 开心版

hopol • • Linux • 7010 阅读

感谢 muziling ！！！

感谢 muziling ！！！

感谢 muziling ！！！

下载地址：

unRAIDServer-6.10.2-x86_64开心

https://mega.nz/file/ZRxzjYjY#huqALCKgDQE8_O752YXbAqbPZ_0V-cIdSrmgEdCCH7Y

临时下载链接：

https://alist.hopolcn.com/d/Mega/unRAID/unRAIDServer-6.10.2-x86_64%E5%BC%80%E5%BF%83.zip?sign=bmaQ_NEepgZf46okZmDfkIy1csJt7S7EAYu6n27HCyA=:0

简单说明：

  • 1、开心最重要，开心方法看 config目录go文件

  • 2、支持硬盘安装，启动硬盘必须为SATA类型，但会独占一块硬盘（即硬盘不能加入阵列使用），可以在vmware里安装测试

  • 3、realtek网卡驱动替换成r8168 v8.050.02

  • 4、2G内存可启动，太小会启动不起来

  • 

  • 开心方法和硬盘安装方法见解压后的config目录go文件，引导盘符要为UNRAID

  • 

  • 

  • 无缝升级方法，除了config目录，全部覆盖，config目录只覆盖3个文件：go, usb, BTRS.key

 

更新日志：

  • ## Version 6.10.2 2022-05-27

  • 

  • 

  • ### Base distro:

  • 

  • - firefox AppImage: version: 100.0.r20220519220738 (CVE-2022-1802 CVE-2022-1529)

  • 

  • ### Linux kernel:

  • 

  • - version 5.15.43-Unraid (CVE-2022-21499)

  • 

  • ### Management:

  • 

  • - nginx: avoid appending default port number to redirect URLs

  • - nginx: self-signed cert file: accept common name and all alternate names

  • - startup: fix multiple network interfaces being assigned the same MAC address

  • - startup: blacklist tg3 by default if Intel VT-d is enabled

  • - webgui: Management Access: Use SSL/TLS setting: change the word 'Auto' to 'Strict'

  • - webgui: Fixed: smGlue not included when selecting a controller

  • - webgui: Fixed: allow share names with embedded ampersand

  • - webgui: add LXC terminal support (for LXC Plugin)

  • - webgui: Docker Web UI to use Docker label for icons as fallback

  • - webgui: VM Manager: support libvirt networks (make libvirt networks accessible via gui)

  • - webgui: fix issue where 'root' login works with password from another username which includes string 'root'

  • - webgui: Update OS page spelling corrction: warninging -> warning

  • - webgui: helptext review: minor corrections

  • 

  • ## Version 6.10.1 2022-05-21

  • 

  • ### Management:

  • 

  • - startup: fix regression: support USB flash boot from other than partition 1

  • 

  • ## Version 6.10.0 2022-05-07

  • 

  • ### Base distro:

  • 

  • - aaa_base: version 15.0

  • - aaa_glibc-solibs: version 2.33

  • - aaa_libraries: version 15.0

  • - acl: version 2.3.1

  • - acpid: version 2.0.33

  • - apcupsd: version 3.14.14

  • - at: version 3.2.3

  • - attr: version 2.5.1

  • - avahi: version 0.8

  • - bash: version 5.1.016

  • - beep: version 1.3

  • - bin: version 11.1

  • - bind: version 9.16.27

  • - bluez-firmware: version 1.2

  • - bridge-utils: version 1.7.1

  • - brotli: version 1.0.9

  • - btrfs-progs: version 5.16

  • - bzip2: version 1.0.8

  • - ca-certificates: version 20220403

  • - celt051: version 0.5.1.3

  • - cifs-utils: version 6.14

  • - coreutils: version 9.0

  • - cpio: version 2.13

  • - cpufrequtils: version 008

  • - cracklib: version 2.9.7

  • - cryptsetup: version 2.4.3

  • - curl: version 7.83.1 (CVE-2022-22576 CVE-2022-27774 CVE-2022-27775 CVE-2022-27776 CVE-2022-27778 CVE-2022-27779 CVE-2022-27780 CVE-2022-27781 CVE-2022-27782 CVE-2022-30115)

  • - cyrus-sasl: version 2.1.27

  • - db48: version 4.8.30

  • - dbus: version 1.12.20

  • - dcron: version 4.5

  • - devs: version 2.3.1

  • - dhcpcd: version 9.4.1

  • - diffutils: version 3.8

  • - dmidecode: version 3.3

  • - dnsmasq: version 2.86

  • - docker: version 20.10.14 (CVE-2022-24769)

  • - dosfstools: version 4.2

  • - e2fsprogs: version 1.46.5

  • - ebtables: version 2.0.11

  • - eject: version 2.1.5

  • - elogind: version 246.10

  • - elvis: version 2.2_0

  • - etc: version 15.0

  • - ethtool: version 5.16

  • - eudev: version 3.2.11

  • - file: version 5.41

  • - findutils: version 4.8.0

  • - flex: version 2.6.4

  • - floppy: version 5.5

  • - fuse3: version 3.10.5

  • - gawk: version 5.1.1

  • - gdbm: version 1.22

  • - genpower: version 1.0.5

  • - getty-ps: version 2.1.0b

  • - git: version 2.35.3 (CVE-2022-24765)

  • - glib2: version 2.70.3

  • - glibc: version 2.33

  • - glibc-zoneinfo: version 2022a

  • - gmp: version 6.2.1

  • - gnutls: version 3.7.2

  • - gptfdisk: version 1.0.8

  • - grep: version 3.7

  • - gzip: version 1.12 (CVE-2022-1271)

  • - hdparm: version 9.63

  • - hostname: version 3.23

  • - htop: version 3.1.2

  • - icu4c: version 69.1

  • - inetd: version 1.79s

  • - infozip: version 6.0

  • - inih: version 53

  • - inotify-tools: version 3.20.11.0

  • - iproute2: version 5.16.0

  • - iptables: version 1.8.7

  • - iputils: version 20211215

  • - irqbalance: version 1.7.0

  • - jansson: version 2.14

  • - jemalloc: version 5.2.1

  • - jq: version 1.6

  • - json-c: version 0.15_20200726

  • - json-glib: version 1.6.6

  • - kbd: version 1.15.3

  • - keyutils: version 1.6.3

  • - kmod: version 29

  • - krb5: version 1.19.2

  • - lbzip2: version 2.5

  • - less: version 590

  • - libaio: version 0.3.112

  • - libarchive: version 3.6.1

  • - libcap-ng: version 0.8.2

  • - libcgroup: version 0.41

  • - libdaemon: version 0.14

  • - libdrm: version 2.4.109

  • - libedit: version 20210910_3.1

  • - libepoxy: version 1.5.9

  • - libestr: version 0.1.9

  • - libevent: version 2.1.12

  • - libfastjson: version 0.99.9

  • - libffi: version 3.3

  • - libgcrypt: version 1.9.4

  • - libgpg-error: version 1.44

  • - libgudev: version 237

  • - libidn: version 1.38

  • - libjpeg-turbo: version 2.1.2

  • - liblogging: version 1.0.6

  • - libmnl: version 1.0.4

  • - libnetfilter_conntrack: version 1.0.8

  • - libnfnetlink: version 1.0.1

  • - libnftnl: version 1.2.1

  • - libnl3: version 3.5.0

  • - libpcap: version 1.10.1

  • - libpciaccess: version 0.16

  • - libpng: version 1.6.37

  • - libpsl: version 0.21.1

  • - libseccomp: version 2.5.1

  • - libssh: version 0.9.6

  • - libssh2: version 1.10.0

  • - libtasn1: version 4.18.0

  • - libtirpc: version 1.3.2

  • - libtpms: version 0.9.0

  • - libunistring: version 0.9.10

  • - libunwind: version 1.6.2

  • - libusb: version 1.0.24

  • - libusb-compat: version 0.1.7

  • - libuv: version 1.41.0

  • - libvirt: version 8.2.0

  • - libvirt-php: version 0.5.6a

  • - libwebp: version 1.2.2

  • - libwebsockets: version 4.2.0

  • - libx86: version 1.1

  • - libxml2: version 2.9.14 (CVE-2022-29824)

  • - libxslt: version 1.1.35

  • - libzip: version 1.8.0

  • - lm_sensors: version 3.6.0

  • - lmdb: version 0.9.29

  • - logrotate: version 3.18.1

  • - lshw: version B.02.19.2

  • - lsof: version 4.94.0

  • - lsscsi: version 0.32

  • - lvm2: version 2.03.13

  • - lz4: version 1.9.3

  • - lzip: version 1.22

  • - lzo: version 2.10

  • - mc: version 4.8.27

  • - mcelog: version 180

  • - miniupnpc: version 2.1

  • - mpfr: version 4.1.0

  • - nano: version 6.0

  • - ncompress: version 5.0

  • - ncurses: version 6.3

  • - net-tools: version 20181103_0eebece

  • - nettle: version 3.7.3

  • - network-scripts: version 15.0

  • - nfs-utils: version 2.5.4

  • - nghttp2: version 1.46.0

  • - nginx: version 1.21.6

  • - nss-mdns: version 0.14.1

  • - ntfs-3g: version 2021.8.22

  • - ntp: version 4.2.8p15

  • - numactl: version 2.0.13

  • - oniguruma: version 6.9.7.1

  • - openssh: version 8.8p1

  • - openssl: version 1.1.1o (CVE-2022-1292)

  • - openssl-solibs: version 1.1.1o (CVE-2022-1292)

  • - p11-kit: version 0.24.1

  • - pam: version 1.5.2

  • - patch: version 2.7.6

  • - pciutils: version 3.7.0

  • - pcre: version 8.45

  • - pcre2: version 10.39

  • - php: version 7.4.29 (CVE-2021-21708)

  • - pixman: version 0.40.0

  • - pkgtools: version 15.0

  • - procps-ng: version 3.3.17

  • - pv: version 1.6.6

  • - qemu: version 6.2.0

  • - qrencode: version 4.1.1

  • - reiserfsprogs: version 3.6.27

  • - rpcbind: version 1.2.5

  • - rsync: version 3.2.3

  • - rsyslog: version 8.2102.0

  • - samba: version 4.15.7 (CVE-2021-44141 CVE-2021-44142 CVE-2022-0336 CVE-2021-44141 CVE-2021-441412 CVE-2022-0336)

  • - sdparm: version 1.12

  • - sed: version 4.8

  • - sg3_utils: version 1.47

  • - shadow: version 4.8.1

  • - smartmontools: version 7.3

  • - spice: version 0.15.0

  • - sqlite: version 3.37.2

  • - ssmtp: version 2.64

  • - sudo: version 1.9.9

  • - swtpm: version 0.7.3 (CVE-2022-23645)

  • - sysfsutils: version 2.1.0

  • - sysvinit: version 2.99

  • - sysvinit-scripts: version 15.0

  • - talloc: version 2.3.2

  • - tar: version 1.34

  • - tcp_wrappers: version 7.6

  • - tdb: version 1.4.6

  • - telnet: version 0.17

  • - tevent: version 0.11.0

  • - traceroute: version 2.1.0

  • - tree: version 1.8.0

  • - ttyd: version 20211023

  • - usbredir: version 0.8.0

  • - usbutils: version 014

  • - utempter: version 1.2.0

  • - util-linux: version 2.37.4

  • - vbetool: version 1.2.2

  • - vsftpd: version 3.0.5

  • - wayland: version 1.20.0

  • - wget: version 1.21.2

  • - which: version 2.21

  • - wireguard-tools: version 1.0.20210914

  • - wsdd2: version 20111022

  • - xfsprogs: version 5.13.0

  • - xxHash: version 0.8.1

  • - xz: version 5.2.5 (CVE-2022-1271)

  • - yajl: version 2.1.0

  • - zlib: version 1.2.12

  • - zstd: version 1.5.2

  • 

  • Included with GUI-mode:

  • 

  • - adwaita-icon-theme: version 40.1.1

  • - at-spi2-atk: version 2.38.0

  • - at-spi2-core: version 2.42.0

  • - atk: version 2.36.0

  • - cairo: version 1.16.0

  • - dbus-glib: version 0.112

  • - freetype: version 2.11.1

  • - fribidi: version 1.0.11

  • - gd: version 2.3.3

  • - gdk-pixbuf2: version 2.42.6

  • - graphite2: version 1.3.14

  • - gtk+3: version 3.24.31

  • - harfbuzz: version 3.2.0

  • - hicolor-icon-theme: version 0.17

  • - libtiff: version 4.3.0

  • - libxkbcommon: version 1.3.1

  • - pango: version 1.48.11

  • - shared-mime-info: version 2.1

  • - startup-notification: version 0.12

  • - appres: version 1.0.5

  • - dejavu-fonts-ttf: version 2.37

  • - editres: version 1.0.7

  • - encodings: version 1.0.5

  • - fontconfig: version 2.13.92

  • - freeglut: version 3.2.1

  • - glew: version 2.2.0

  • - glu: version 9.0.2

  • - libICE: version 1.0.10

  • - libSM: version 1.2.3

  • - libX11: version 1.7.3.1

  • - libXau: version 1.0.9

  • - libXaw: version 1.0.14

  • - libXcomposite: version 0.4.5

  • - libXcursor: version 1.2.0

  • - libXdamage: version 1.1.5

  • - libXdmcp: version 1.1.3

  • - libXevie: version 1.0.3

  • - libXext: version 1.3.4

  • - libXfixes: version 6.0.0

  • - libXfont: version 1.5.2

  • - libXfont2: version 2.0.5

  • - libXfontcache: version 1.0.5

  • - libXft: version 2.3.4

  • - libXi: version 1.8

  • - libXinerama: version 1.1.4

  • - libXmu: version 1.1.3

  • - libXpm: version 3.5.13

  • - libXrandr: version 1.5.2

  • - libXrender: version 0.9.10

  • - libXres: version 1.2.1

  • - libXt: version 1.2.1

  • - libXtst: version 1.2.3

  • - libXxf86dga: version 1.1.5

  • - libXxf86misc: version 1.0.4

  • - libXxf86vm: version 1.1.4

  • - libdmx: version 1.1.4

  • - libevdev: version 1.12.0

  • - libfontenc: version 1.1.4

  • - libglvnd: version 1.3.3

  • - libpthread-stubs: version 0.4

  • - libxcb: version 1.14

  • - libxkbfile: version 1.1.0

  • - libxshmfence: version 1.3

  • - listres: version 1.0.4

  • - mkfontscale: version 1.2.1

  • - mtdev: version 1.1.6

  • - sessreg: version 1.1.2

  • - setxkbmap: version 1.3.2

  • - transset: version 1.0.2

  • - xauth: version 1.1.1

  • - xcb-util: version 0.4.0

  • - xdpyinfo: version 1.3.2

  • - xdriinfo: version 1.0.6

  • - xev: version 1.2.4

  • - xf86-input-evdev: version 2.10.6

  • - xf86-input-keyboard: version 1.9.0

  • - xf86-input-mouse: version 1.9.3

  • - xf86-input-synaptics: version 1.9.1

  • - xf86-video-ast: version 1.1.5

  • - xf86-video-mga: version 2.0.0

  • - xf86-video-vesa: version 2.5.0

  • - xhost: version 1.0.8

  • - xinit: version 1.4.1

  • - xkbcomp: version 1.4.5

  • - xkbevd: version 1.1.4

  • - xkbutils: version 1.0.4

  • - xkeyboard-config: version 2.34

  • - xkill: version 1.0.5

  • - xload: version 1.1.3

  • - xlsatoms: version 1.1.3

  • - xlsclients: version 1.1.4

  • - xmessage: version 1.0.5

  • - xmodmap: version 1.0.10

  • - xorg-server: version 1.20.14

  • - xprop: version 1.2.5

  • - xrandr: version 1.5.1

  • - xrdb: version 1.2.1

  • - xrefresh: version 1.0.6

  • - xset: version 1.2.4

  • - xsetroot: version 1.1.2

  • - xsm: version 1.0.4

  • - xtrans: version 1.4.0

  • - xwd: version 1.0.8

  • - xwininfo: version 1.1.5

  • - xwud: version 1.0.5

  • - imlib2: version 1.7.1

  • - fluxbox: version 1.3.7

  • - slim: version 1.3.6

  • - vte3: version 0.50.2

  • - sakura: version 3.5.0

  • - xclock: version 1.0.9

  • - xterm: version 370

  • - hwloc: version 2.2.0

  • 

  • ### Linux kernel:

  • 

  • - version 5.15.40-Unraid (CVE-2021-33909 CVE-2021-33910 CVE-2022-0847)

  • - patch: "drm/i915/gen11: Moving WAs to icl_gt_workarounds_init()"

  • - patch: "add-relaxable-rmrr-5_8_and_up.patch" modified for this kernel

  • - added features:

  •   - several ACPI-related CONFIG settings

  •   - CONFIG_TCG_TPM and associated TPM chip drivers

  •   - CONFIG_NFS_V4: NFS client support for NFS version 4

  •   - CONFIG_NFSD_V4: NFS server support for NFS version 4

  •   - CONFIG_USB_RTL8152: Realtek RTL8152/RTL8153 Based USB Ethernet Adapters

  •   - CONFIG_USB_NET_AQC111: Aquantia AQtion USB to 5/2.5GbE Controllers support

  •   - CONFIG_USB4: Unified support for USB4 and Thunderbolt

  •   - CONFIG_USB4_NET: Networking over USB4 and Thunderbolt cables

  •   - CONFIG_DRM_I915_GVT: Enable Intel GVT-g graphics virtualization host support

  •   - CONFIG_DRM_I915_GVT_KVMGT: Enable KVM/VFIO support for Intel GVT-g

  •   - CONFIG_VFIO_MDEV: Mediated device driver framework

  •   - CONFIG_VFIO_MDEV_DEVICE: VFIO driver for Mediated devices

  •   - CONFIG_FTRACE: Tracers

  •   - CONFIG_FUNCTION_TRACER: Kernel Function Tracer

  •   - CONFIG_KPROBES: Kprobes

  •   - CONFIG_DEBUG_KERNEL: Kernel debugging

  •   - CONFIG_KALLSYMS_ALL: Include all symbols in kallsyms

  •   - CONFIG_ISCSI_TCP: iSCSI Initiator over TCP/IP (per Community Member @ich777)

  •   - CONFIG_GIGABYTE_WMI: Gigabyte WMI temperature driver

  • - BPF kernel options (user request):

  •   - CONFIG_BPF_SYSCALL: Enable bpf() system call

  •   - CONFIG_BPF_JIT: Enable BPF Just In Time compiler

  •   - CONFIG_BPF_JIT_ALWAYS_ON: Permanently enable BPF JIT and remove BPF interpreter

  •   - CONFIG_NET_CLS_BPF: BPF-based classifier

  •   - CONFIG_NET_CLS_ACT: Actions

  •   - CONFIG_NET_ACT_BPF: BPF based action

  •   - CONFIG_IKHEADERS: Enable kernel headers through /sys/kernel/kheaders.tar.xz

  •   - CONFIG_NET_SCH_SFQ: Stochastic Fairness Queueing (SFQ)

  •   - CONFIG_NET_ACT_POLICE: Traffic Policing

  •   - CONFIG_NET_ACT_GACT: Generic actions

  •   - CONFIG_GACT_PROB: Probability support

  •   - CONFIG_NET_SCH_INGRESS: Ingress/classifier-action Qdisc

  •   - CONFIG_CGROUP_BPF: Support for eBPF programs attached to cgroups

  • - md/unriad: version 2.9.22

  •   - fix: md_sync_limit was being ignored

  • 

  • ### Management:

  • 

  • - better IPv6 suport

  • - diagnostics: add bz*.sha256 values

  • - diagnostics: Improved anonymization

  • - diagnostics: Anonymize mover

  • - diagnostics: better package listings in folders.txt

  • - diagnostics: do not anonymize 169.254.x.x addresses

  • - emhttp new defaults:

  •   - root password required

  •   - newly created shares not exported by default

  •   - predefined 'flash' share not exported by default

  •   - ssh, telnet: disabled by default

  •   - NetBIOS disabled by default

  •   - WSD enabled by default (and using newer 'wsdd2' package)

  •   - Enhanced macOS interoperability enabled by default

  •   - for 'domains' and 'system' shares, change 'Enable Copy-on-write' default setting from 'No' to 'Auto'

  •   - change poll_attributes tunable default value from 30 min to 30 sec.

  • - emhttpd: add 'rootshare' reserved name

  • - emhttpd: fix regression: user shares should be enabled by default

  • - emhttpd: minimize information transmitted by UpdateDNS function

  • - emhttpd: use shfs ioctl to invalidate shfs cached share info when share cfg changes

  • - emhttpd: fix incorrect handling of unassigned device read/write counters

  • - emhttpd: fix sometimes wrong device name assigned to hotplugged unassigned devices

  • - emhttpd: fix btrfs-replace case

  • - emhttpd: fix btrfs pool device replace still showing 'missing'

  • - emhttpd: delete all PHP sessions when root password is changed (logs everyone out)

  • - emhttpd: correct device status handling for single-slot pools

  • - emhttpd: collapse multiple underscores within nvme /dev/disk/by-id symlinks to single underscore

  • - firefox: version 91.0.r20210823123856 (AppImage)

  • - mover: fix bug not moving shares with embedded spaces

  • - mover: append '.partial' suffix to filename when move in-progess

  • - rc.docker: fix startup network race condition

  • - rc.libvirt: Prevent Unraid from hanging when the array is stopped, while VMs are in paused or suspended state

  • - rc.libvirt: test the existence of a VM before adding it to the NAMES list

  • - rc.mcelog: mcelog added to base distro

  • - rc.nginx: change fastcgi_read_timeout from 120s to 640s

  • - rc.nginx: remove ttyd side-loading

  • - rc.nginx: support Lets Encrypt wildcard certs

  • - rc.nginx: support custom wildcard self-signed certs

  • - rc.nginx: self-signed cert subject OU change from "unRAID" to "Unraid"

  • - rc.nginx: ignore case in processing Subject field for custom certificates

  • - rc.nginx: remove default server block returning 404 for https if USE_SSL==no and no CA-signed cert

  • - rc.samba: disable SMB Multi Channel by default; add control to Settings/SMB Settings page

  • - rc.S: check bz file sha256 during initial boot

  • - shfs: fix bug where permissions being ingored ('default_permissions' was missing in mount command)

  • - sysctl: handle net.netfilter.nf_conntrack_count max exceeded (increase setting to 131072)

  • - ttyd: fix garbled text in local FireFox Termainl windows

  • - upgradepkg: do not upgrade if existing package is newer

  • - wsdd2: listen only on active interface by default (br0, bond0, or eth0)

  • - webgui: Integrate header UPC

  • - webgui: Add Apps link to install CA

  • - webgui: Add internal container reference

  • - webgui: Add new setting "Terminal font size"

  • - webgui: Add notification agent for Pushplus

  • - webgui: Add notification agent for ServerChan

  • - webgui: Add 'root' folder protection to filetree

  • - webgui: Add tracking after system shutdown

  • - webgui: Add vmxnet3 and e1000 into available NICs for VMs

  • - webgui: Added "User 'root'" reference on Management Access page

  • - webgui: Added notify when plugin fails to install

  • - webgui: Added: Cumulative parity check. This allows a parity check to be divided over multiple time windows.

  • - webgui: Adjusted row highlighting on main and shares page to better suit people with color impairment

  • - webgui: Allow CA to get all docker info without having to download icons if not present

  • - webgui: Allow all notification agents to send links

  • - webgui: Allow ruleset for local rules in rsyslog.conf

  • - webgui: Allow simultaneous log and console windows for containers

  • - webgui: Always show "WebUI" for user specified URLs

  • - webgui: BTRFS balance and scrub scheduler

  • - webgui: BTRFS balance: fix recommendation message when volume is empty

  • - webgui: Better array sync when multiple sessions are opened

  • - webgui: Better translation of docker container variables

  • - webgui: CSS minor corrections

  • - webgui: Change Dashboard Parity status to be invalid and not emulated.

  • - webgui: Change page switching to better suit Safari on mobile devices

  • - webgui: Change parity sync notification from error to notice level

  • - webgui: Changed header selection for better support of Android

  • - webgui: Check for flash offline / quick check on if it is corrupted

  • - webgui: Cleanup styles folder

  • - webgui: Compress too long share names in dropdown menus

  • - webgui: ContextMenu: added option "button": defaults to "left" (current behavior), other options are "right" and "both"

  • - webgui: Convert notify polling to Nchan

  • - webgui: Create favicon.ico

  • - webgui: Create syslog entry when user logs out

  • - webgui: Dashboard: add CPU and NETWORK chart

  • - webgui: Dashboard: fix bar color when disk thresholds are disabled

  • - webgui: Dashboard: separate cpu details and graph view

  • - webgui: Delete DockerRepositories.page

  • - webgui: Device_list replace .png icon with font icon

  • - webgui: Diagnostics fix plugin deprecated max version error

  • - webgui: Diagnostics: Add share summary

  • - webgui: Diagnostics: Add share summary

  • - webgui: Diagnostics: Include current plugin versions

  • - webgui: Diagnostics: Remove lines from go containing passwords etc

  • - webgui: Diagnostics: Revamp anonymization

  • - webgui: Diagnostics: add DHCP log

  • - webgui: Diagnostics: add check for DNS Rebinding Protection

  • - webgui: Diagnostics: add url details

  • - webgui: Diagnostics: privatize routable IPs

  • - webgui: DisplaySettings: add "showBannerGradient"

  • - webgui: Do not highlight false positive ERST error

  • - webgui: Docker page loading improvements

  • - webgui: Docker settings: suppress browser presets

  • - webgui: Docker utilization warning only when image file

  • - webgui: Docker: Add Network / Privacy Category

  • - webgui: Docker: Add crypto as a category

  • - webgui: Docker: Do not update installed user templates

  • - webgui: Docker: Fix incorrect caching when deleting / recreating image

  • - webgui: Docker: Handle edge case involving browser back button when within CA in certain unlikely circumstances

  • - webgui: Docker: Ignore icon references to default question mark

  • - webgui: Docker: Only save templates as v2

  • - webgui: Docker: Silence PHP errors when editing a template if corruption exists

  • - webgui: Docker: Support CA tag

  • - webgui: Docker: Support ReadMe in context menus

  • - webgui: Docker: add description to all custom networks

  • - webgui: Docker: add route for remote WireGuard access

  • - webgui: Docker: add route for remote WireGuard access:

  • - webgui: Docker: add route for remote WireGuard access:

  •   - "Host access to custom networks" must be enabled to allow access

  •   - Containers with network 'br0' can be remotely accessed by WireGuard without the need to configure static routes on the home router (gateway)

  • - webgui: Docker: add time unit in settings

  • - webgui: Docker: add wireguard description in network selection

  • - webgui: Docker: compress too long author names

  • - webgui: Docker: fix GUI may hang when multiple screens are opened

  • - webgui: Docker: fix overlapping container ID display

  • - webgui: Docker: fix spinner will not disappear after attempting to uninstall a non-existent container

  • - webgui: Docker: fixed filetree sometimes not visible

  • - webgui: Docker: fixed header display causes gap

  • - webgui: Docker: fixed list display in fixed view mode

  • - webgui: Docker: fixed template removal when no containers exist

  • - webgui: Docker: make popup window fit in browser window

  • - webgui: Docker: optimized contextmenu

  • - webgui: Docker: process bash ANSI colors in web log display

  • - webgui: Docker: remove close button in popup windiow

  • - webgui: Docker: translation optimization

  • - webgui: Docker: update window uses color of selected theme

  • - webgui: Edit/Add Container: Fix browser console error

  • - webgui: Enable/Disable SMART extended test depending on spin down delay setting

  • - webgui: Error checking etc on ports for syslog server

  • - webgui: Escape double quotes in text input submit

  • - webgui: Expand file type icon selection

  • - webgui: Expand ipaddr() with protocol: protocol defaults to ipv4 in case of ipv4 + ipv6

  • - webgui: Fix CPU model sometimes not present

  • - webgui: Fix PHP error when calculating balance level

  • - webgui: Fix corruption check after a New Config is issued

  • - webgui: Fix missing csrf-token in Notify

  • - webgui: Fix monitor false positives

  • - webgui: Fix network bonding display

  • - webgui: Fix pools display on Main page when empty pool exists

  • - webgui: Fix regression error for themes auzre & gray

  • - webgui: Fix side bar of themes azure/gray in firefox

  • - webgui: Fix: Improved DNS Rebinding checks

  • - webgui: Fixed PHP errors for share and disk calculations

  • - webgui: Fixed balance/scrub schedule not saved when device name has "-" in it

  • - webgui: Fixed comments field only for selected disks

  • - webgui: Fixed parity duration + speed when paused/resumed

  • - webgui: Fixed smart temperature settings sometimes not possible

  • - webgui: Fixed: VM 9p add share issue

  • - webgui: Fixed: buttons not working in device info when no device is present

  • - webgui: Fixed: missing samesite attribute in cookies

  • - webgui: Fixed: parity history sometimes wrongly processed

  • - webgui: Fixed: race condition when array is stopped and device assignments are changed

  • - webgui: Fixed: specific disk settings for pool devices only

  • - webgui: Fixed: speed calculation of parity check

  • - webgui: Fixed: spinner stays visible after docker command

  • - webgui: Fixes and enhancements in Browse function

  • - webgui: Font files update:

  • - Adjust css settings

  •   - Cleanup font files, use only woff format

  •   - Restore clear-sans font

  • - Update bitstream font

  •   - bitstream --> source code pro

  •   - clear-sans --> source sans pro

  • - webgui: Force creation of root password

  • - webgui: Highlight selected row when hovering over array or shares

  • - webgui: Improved background process detection and handling

  • - webgui: Improved format of stale and error plugin pages

  • - webgui: Include links in email and Discord agent notifications

  • - webgui: Let setting "showBannerGradient" default to "yes"

  • - webgui: Limit popup window width on ultrawide monitors

  • - webgui: Log docker icon download failures

  • - webgui: Lower update frequency of monitor function to better suit mobile devices

  • - webgui: Main page - lower table update frequency for better responsiveness of links

  • - webgui: Make WireGuard trademark visible on "full" page

  • - webgui: Make links in help text standout (red)

  • - webgui: Management: fix ports in use check

  • - webgui: Miscellaneous updates and fixes

  • - webgui: Move Start button below encryption field

  • - webgui: NFS: fix copying of hostList after READ operation

  • - webgui: Nchan: Use multiplexed channels and add error reporting

  • - webgui: Only allow png files to be uploaded as user image

  • - webgui: Open terminal window with dynamic size

  • - webgui: Parity check: allow spinup/spindown when operation is paused

  • - webgui: Parity check: re-introduce Done button when finished

  • - webgui: Parity operation enhancements:

  •   - Add disk clear action

  •   - Add parity operation action to history view

  •   - Added "size" column to parity history

  •   - CSS adjustment in SMART attributes

  •   - Correct calculations for data-rebuild smaller than parity

  •   - Separate Parity-Sync and Data-Rebuild as individual actions

  •   - Show additional buttons in Array Stopped state

  •   - Textual enhancements

  •   - Use Nchan updates for copying/clearing progress

  • - webgui: Parity: shown duration time excluding idle time

  • - webgui: Plugin manager: fix branch select gets unnecessary disabled

  • - webgui: Plugins page loading improvements

  • - webgui: Proactive script security hardening

  • - webgui: Relax SMART detection logic

  • - webgui: Relax update frequency a bit

  • - webgui: Remove Nchan error detection (Rely on the automatic reconnect of Nchan to re-establish connections when communication is slow)

  • - webgui: Remove deprecated font extensions: eot, svg, ttf

  • - webgui: Replace polling scripts with event driven Nchan interface

  • - webgui: Revert back to default capitalization of device names

  • - webgui: Revised filedrop.js

  • - webgui: Right-clicking or long-clicking a menu item should open the selected menu

  • - webgui: SSH authorized keys UI

  • - webgui: Set Main page update frequency to 1s for better support of mobile devices

  • - webgui: Shares: fix wrong size computation

  • - webgui: Show IP on VM Manager VM Page

  • - webgui: Show management access and shares access groups for users

  • - webgui: Show warning when javascript is disabled

  • - webgui: Sign-in required to provision/renew Unraid LE SSL certificate

  • - webgui: Silence PHP error on syslinux page if flash drive is missing

  • - webgui: Support future T2FA

  • - webgui: Support multi-language in filetree display

  • - webgui: Suppress IPv6 anycast addresses in routing table

  • - webgui: Suppress non-relevant IPv6 routes in routing table

  • - webgui: System devices additions

  • - webgui: System info: fix translation

  • - webgui: Translation support (Unraid.net)

  • - webgui: Translations: fix creation of empty sessions

  • - webgui: Update Credits.page

  • - webgui: Update DashStats.page

  • - webgui: Update FileTree.php

  • - webgui: Update GUI with latest helptext

  • - webgui: Update Outlook/Hotmail smtp settings

  • - webgui: Update alert text

  • - webgui: Update css files to use woff and woff2 formats only

  • - webgui: UpdateDNS to prefer IPv4 first and then IPv6

  • - webgui: Updated bitstream font to support more languages

  • - webgui: Updated help text for Display settings and Docker

  • - webgui: Use background checking for flash corruption

  • - webgui: Use https for internet connectivity check

  • - webgui: Use tabbed view for device information page

  • - webgui: Use ttyd for logging windows

  • - webgui: VM Manager: add virtio-win-0.1.208.iso download link

  • - webgui: VM Manager: added Windows 11 template and OVMF TPM

  • - webgui: VM editor style update

  • - webgui: VM: fix missing path selection (for GPU firmware file)

  • - webgui: VMs: automatically update virtio-win iso list

  • - webgui: VMs: optimized contextmenu

  • - webgui: Validate WebGUI ports before applying

  • - webgui: Validate destination of VirtIO ISO downloads

  • - webgui: When viewing source, identify which .page file is responsible

  • - webgui: WireGuard integrated

  • - webgui: WireGuard updates:

  • - webgui: WireGuard updates:

  •   - Add tunnel routing for docker containers

  •   - Automatically make the WG tunnel available to containers (custom network)

  •   - Make import config file of VPN providers more robust.

  •   - VPN tunneled access for docker

  •   - VPN tunneled access for system

  • - webgui: WireGuard: Add warning when tunnel deletion fails

  • - webgui: WireGuard: Introduce new network modes:

  • - webgui: WireGuard: add logic to recreate networks after reboot

  • - webgui: WireGuard: fixed proper handling of ipv4 + ipv6 tunnels

  • - webgui: WireGuard: preset peer DNS server with "Remote tunneled access"

  • - webgui: WireGuard: use kill switch when tunnel inactive

  • - webgui: WireGuard: user nginx settings and unraid.net api

  • - webgui: WireGuard: warn when directly connected with public IP

  • - webgui: Wireguard: fix import function to accept all keys

  • - webgui: Wireguard: make management interface seletable:

  • - webgui: Wireguard: make management interface seletable:

  •   - Defaults to eth0 - future expansion

  • - webgui: Wireguard: strip ListenPort from file input:

  •   - ListenPort must be unique, let WG generate a random local port instead

  • - webgui: css scrollbar enhancements

  • - webgui: diagnostics: fix: anonymize myunraid.net urls

  • - webgui: dockerMan Security: Remove HTML tags from Config elements

  • - webgui: dockerMan: remove HTML from descriptions

  • - webgui: fix: password lockouts not being cleared properly

  • - webgui: fix: remove reauthentication msg from email notifications

  • - webgui: improve: Highlight selected row when hovering over array or shares

  • - webgui: jQuery: version 3.6.0

  • - webgui: present CA-signed certificate subject as a link

  • - webgui: privatize host in diagnostics

  • - webgui: refactor UpdateDNS.php: anonymize verbose output by default, other improvements

  • - webgui: remove 'My Servers' skeleton page

  • - webgui: require sign in to provision cert

  • - webgui: support simultanious LAN SSL with self-signed cert and DNS-based SSL with Lets Encrypt cert

  • - webgui: various Multi-language corrections

 

 

版权声明：
作者：hopol
链接：https://hopolcn.com/2022/06/2080/
来源：HopoL's Blog
文章版权归作者所有，未经允许请勿转载。

THE END
分享
二维码
< <上一篇
下一篇>>
文章目录

下载地址：

简单说明：

更新日志：

关闭
目 录