unRAID NAS Server Pro 7.2.0 7.2.2 Crack

1,131 views次阅读
62 条评论

unRAID NAS Server Pro 7.2.0 7.2.2 Crack

特别鸣谢

PRYANIK@softoroom

下载地址:(解压密码:hopol)

unRAID Server Pro 7.2.0.7z

https://mega.nz/file/0MxgiATB#2fBSknVNYX8wKpXbOh71IwGTBeqwepEb-wSW3BeK7Zc

 

unRAID Server Pro 7.2.2.7z

https://mega.nz/file/tIhSiJJB#CE2Dria54zfoFPhPOsb0fnKQeiMIDgvWrqNYWt25Ppw

 

临时下载链接:

unRAID Server Pro 7.2.0.7z

https://pan.hopolcn.com/s/06UE

 

unRAID Server Pro 7.2.2.7z

https://pan.hopolcn.com/s/BLfM

 

学习方法

在升级到 7.2.0 版之前必须修改 unraider 文件,否则 GUID 将被锁定。

The unraider file needs to be modified before updating to version 7.2.0, otherwise the GUID will be blocked.

 

全新安装

1、unRAIDServer-7.2.0-x86_64.zip 解压到 USB引导设备;

2、将 unraider-7.2.0 改名为 unraider 复制到 USB引导设备根目录下的 config 文件夹下;

3、确认 config 文件夹下的 go 文件内容是否如下:

#!/bin/bash
export UNRAID_GUID=HERE IS YOUR GUID
export UNRAID_NAME=Tower
export UNRAID_DATE=1654646400
export UNRAID_VERSION=Pro
/lib64/ld-linux-x86-64.so.2 /boot/config/unraider
# Start the Management Utility
/usr/local/sbin/emhttp

UNRAID_GUID=HERE IS YOUR GUID

是您的 Flash GUID

 

从旧版本更新

http://X.X.X.X:portofunraid/Main/Flash?name=flash

创建备份文件到USB设备(X.X.X.X 为设备IP)

unRAID NAS Server Pro 7.2.0 7.2.2 Crack

数据无价,备份很重要,别丢了。

 

更新:

1、将 unraider-7.2.0 改名为 unraider 复制到 USB引导设备根目录下的 config 文件夹下;

2、确认 config 文件夹下的 go 文件内容是否如下:

#!/bin/bash
export UNRAID_GUID=HERE IS YOUR GUID
export UNRAID_NAME=Tower
export UNRAID_DATE=1654646400
export UNRAID_VERSION=Pro
/lib64/ld-linux-x86-64.so.2 /boot/config/unraider
# Start the Management Utility
/usr/local/sbin/emhttp

UNRAID_GUID=HERE IS YOUR GUID

是您的 Flash GUID

 

help

The unraider file needs to be modified before updating to version 7.2.0, otherwise the GUID will be blocked.
If you have already updated, revert to version 7.1.4 (if a ban has already been imposed, it can only be removed manually).

Rollback is available manually by replacing files from the backup; it does not work automatically, clears the previous folder, and reports that it is impossible to revert to the previous version.

 

Best 7z Extractors for macOS

Keka

https://www.keka.io

 

789-Zip

https://789-zip.app/

 

The Unarchiver

https://theunarchiver.com/

正文完
 6
HopoL
版权声明:本站原创文章,由 HopoL 于2025-11-03发表,共计1814字。
转载说明:除特殊说明外本站文章皆由CC-4.0协议发布,转载请注明出处。
评论(62 条评论)
HopoL 博主
2025-11-03 13:34:47 回复

设置为回复可见内容,避免误导新手

 Macintosh  Safari
心晴 评论达人 LV.1
2025-11-03 23:21:00 回复

谢谢大佬分享,感谢大佬

 Windows  Chrome  中国四川省乐山市电信
    HopoL 博主
    2025-11-04 10:02:20 回复

    @心晴 :cool: 开心就好 !~ 谢谢!~

     Chrome OS  Chrome
    心晴 评论达人 LV.1
    2025-11-04 19:56:27 回复

    @心晴 :smile:

     Windows  Chrome  中国四川省乐山市电信
Toan4th 评论达人 LV.1
2025-11-04 02:40:37 回复

what's the actual password, i tried "hopol" but it doesn't work

 Macintosh  Chrome  越南河内越南邮电
    HopoL 博主
    2025-11-04 09:57:07 回复

    @Toan4th Hey, the actual password is "hopol". I've double-checked, and there shouldn't be any mistake. Maybe copy and paste the password to be sure there are no typos, and check if your archive tool supports 7z files properly. Let me know if it still doesn't work! :celebrate:

     Chrome OS  Chrome
    HopoL 博主
    2025-11-04 10:28:36 回复

    @Toan4th I’ve added a short list of Mac-friendly 7z extractors at the end of the post. :cool:

     Linux  Firefox
      Toan4th 评论达人 LV.1
      2025-11-04 14:10:12 回复

      @HopoL thanks dude, i turns out it was mac's default not playing nice

       Macintosh  Chrome  越南河内越南邮电
      Toan4th 评论达人 LV.1
      2025-11-04 14:19:12 回复

      @HopoL can you unlock it for me
      "This contains hidden content. Please submit a comment and refresh the page after approval to view it!"

      Also, can you verify if this is what you meant by "modifying unraider file"
      So Unraid 7.1.4 server is running, i go into the usb /config folder and replace the 7.1.4 Unraider file with
      the 7.2 Unraider file. Update from the Unraid Web UI and done?

       Macintosh  Chrome  越南河内越南邮电
      Toan4th 评论达人 LV.1
      2025-11-04 14:35:42 回复

      @HopoL I can't seem to create an account to view your instructions

       Macintosh  Chrome  越南河内越南邮电
ewfewefwf 评论达人 LV.1
2025-11-04 03:23:58 回复

the password works. just copy and paste. how do i update from 7.1.4? What do need to modify?

 Windows  Chrome  德国Schleswig-Holstein
    HopoL 博主
    2025-11-04 10:00:58 回复

    @ewfewefwf Glad the password worked! In this reply, you’ll find upgrade instructions, but the content is in Chinese—so you might want to use a translation tool to read it more easily. Let me know if you need help!

     Chrome OS  Chrome
ssabb3 评论达人 LV.1
2025-11-04 10:28:00 回复

how to update then?

 Windows  Chrome  瑞典
    HopoL 博主
    2025-11-04 10:47:18 回复

    @ssabb3 After you reply, you’ll be able to see the content—just a heads-up, it’s all in Chinese. If it looks tricky to read, toss it into a translation app for a quick fix. Any questions or hiccups, just let me know—happy to help!

     Linux  Firefox
ssabb3 评论达人 LV.1
2025-11-04 10:58:06 回复

so I need to change the line "export UNRAID_GUID=xxx" to the GUID reported for the usb? Have been running 6.x not chaning the "export UNRAID_GUID" from its default text string, and it worked.

 Windows  Chrome  瑞典
VvLin-61 评论达人 LV.1
2025-11-04 12:33:59 回复

手慢了,升级了被锁了,试一下能不能解

 Windows  Edge  中国天津天津市联通
    HopoL 博主
    2025-11-04 12:41:33 回复

    @VvLin-61 试试 降级 7.1.4 后在 ,按照上面 方法 升级 7.2.0 ,看能不能解锁 ~

     Windows  Firefox
      q976169045 评论达人 LV.1
      2025-11-10 13:38:26 回复

      @HopoL 直接替换了unraider就可以启动了,解锁了。
      我之前用的官方升级,如果我想用你这个压缩包覆盖升级,是不是全部覆盖u盘就可以,再把之前的go文件放过来,会保留docker那些配置文件吗?

       Windows  Edge  中国新疆乌鲁木齐市联通
q976169045 评论达人 LV.1
2025-11-04 12:36:08 回复

这个评论的头像是从哪获取的呀

 Windows  Edge  中国天津天津市联通
Nil 评论达人 LV.1
2025-11-04 13:23:34 回复

Yep got a ban now doing properly

 Android  Chrome  印度奥里萨Tata
DoanhHD 评论达人 LV.1
2025-11-04 16:47:10 回复

thank you for sharing

 Windows  Edge  越南岘港市越南邮电
Paolo 评论达人 LV.1
2025-11-04 22:10:12 回复

Non ho capito bene come fare l'aggiornamento come tanti altri, puoi scrivere passo passo? Io mi trovo nella condizione di eseguire 7.1.4 e per passare a 7.2.0 cosa devo fare esattamente? Prendere il file unraider e incollarlo dentro l'usb prima di lanciare l'upgrade? Basta solo questo o manca qualcosa? grazie

 Macintosh  Chrome  美国加利福尼亚圣何塞
    Toan4th 评论达人 LV.1
    2025-11-05 03:22:53 回复

    @Paolo i was thinking the same, replace the unraider file of the a running unraid 7.1.4 server then update via the web ui. But that's my guess, the guy hasn't responded yet

     Macintosh  Chrome  越南河内越南邮电
      HopoL 博主
      2025-11-05 09:19:34 回复

      @Toan4th Basically, just replace the unraider file in the config folder on your USB boot drive using the terminal, then go ahead and start the upgrade. That’s it!

       Macintosh  Safari
    HopoL 博主
    2025-11-05 09:12:27 回复

    @Paolo If you want to upgrade from 7.1.4 to 7.2.0, just rename unraider-7.2.0 to unraider, and then replace the old unraider file inside the config folder on your USB boot drive. After that, just start the upgrade on your running system—you’re all set!

     Macintosh  Safari
      Toan4th 评论达人 LV.1
      2025-11-05 15:33:10 回复

      @HopoL It works, thanks dude. Had to use a 2nd USB just in case but it works either way! Love you dude (no homo)

       Macintosh  Firefox  越南河内越南邮电
      cowboype 评论达人 LV.1
      2025-11-06 09:10:36 回复

      @HopoL How can I upgrade in running system? Tell us step-by-step pls. thx

       Windows  Firefox  巴西
aaa 评论达人 LV.1
2025-11-05 01:12:39 回复

感谢大佬

 Windows  Firefox  美国加利福尼亚圣何塞
justMe 评论达人 LV.1
2025-11-05 04:20:39 回复

thanks for sharing!

 Windows  Chrome  斯洛文尼亚
Esteban 评论达人 LV.1
2025-11-06 01:34:43 回复

Hello and thank you for this patch I've used twice.

I've just tried to patch and upgrade from 7.1.4 to 7.2.0 but it failed, got a message my key was blacklisted, had to use my backup to roll back.

I don't understand what I missed, would you please help me a bit?

UNRAID is still running 7.1.4
I got your patch extracted, renamed unraider-7.2.0 to unraider and drop it to my USB FlashDrive /config
Upgrade UNRAID to 7.2.0
Reboot

And I got blacklisted.
I didn't modify my go file, is that the problem?
UNRAID_GUID = the GUID related to http://ip:port/Main/Flash?name=flash

#!/bin/bash
export UNRAID_GUID=xxxxx
export UNRAID_NAME=HomeBox
export UNRAID_DATE=1654646400
export UNRAID_VERSION=Pro
/lib64/ld-linux-x86-64.so.2 /boot/config/unraider

# Start the Management Utility
/usr/local/sbin/emhttp

# Start the LincStation N1 LED Service
cp -r /boot/config/led/ /usr/local/sbin/led/
chmod 777 /usr/local/sbin/led/go_8130_led_linux
nohup /usr/local/sbin/led/go_8130_led_linux >/dev/null 2>&1 &

Hope anyone could help me understand.

 Linux  Firefox  法国Vienne橘子电信
    HopoL 博主
    2025-11-06 08:54:34 回复

    @Esteban Based on your situation, after rolling back to 7.1.4, try deleting everything on your USB drive except the config folder. Then, take all files from the unRAIDServer-7.2.0-x86_64.zip except the config folder and copy them over to the USB. If that doesn't work, you can try switching to a different USB boot drive—just make sure your config backup is safe, then replace the UNRAID_GUID. Hope this helps!

     Linux  Firefox
      Esteban 评论达人 LV.1
      2025-11-07 20:39:46 回复

      @HopoL Thanks, I could roll back to 7.1.4.
      As i'm using Lincstation N1, it's a micro USB key inside an NVMe storage. Maybe it's related to Delyfeel comment?

       Linux  Firefox  英国伦敦伦敦
Delyfeel 评论达人 LV.1
2025-11-06 19:50:01 回复

使用TF卡或者通用存储没有独立GUID的设备启动unraid7.2会导致显示锁定,破解不够完整。尝试降级到7.14,用老的unraider文件替换回去继续用老版本吧

 Windows  Edge  美国加利福尼亚
KAIZ 评论达人 LV.1
2025-11-07 02:41:26 回复

Update instructions??

 Linux  Chrome  加拿大曼尼托巴温尼伯
Luffy 评论达人 LV.1
2025-11-09 15:18:40 回复

I encountered a new situation. I followed the guideline — replaced the Unraider file first, then performed the upgrade from the Web UI. However, when I started Unraid for the first time after the upgrade, it showed a “Missing license key” error. I tried shutting it down and re-copying the “unraider” file again, and that fixed the issue. Thanks for your help!

 Windows  Edge  越南河内Finance-and-Promoting-Technology
hpapagaj 评论达人 LV.1
2025-11-13 03:38:08 回复

Thank you.

 Macintosh  Safari  斯洛伐克
步兵 评论达人 LV.1
2025-11-16 12:12:22 回复

哈喽 想请问一下文件是从老毛子网站下载的吗 因为怕有挖矿的后门 所以想了解确认一下 感谢

 Windows  Edge  中国山东省潍坊市电信
Adrian 评论达人 LV.1
2025-11-20 19:29:08 回复

How update works? Should we rename unraider file, do the update and rename back?

from 7.2.0 to 7.2.1

 iPhone  Safari  斯洛伐克
saisu 评论达人 LV.1
2025-11-21 18:48:24 回复

how to install from scratch for noobs like me please :D
What is GUID ??

 Windows  Chrome  摩洛哥
tstUser01 评论达人 LV.1
2025-11-25 21:20:37 回复

Thanks for sharing!

 Windows  Firefox  菲律宾
wice222 评论达人 LV.1
2025-11-26 08:27:18 回复

archive is demaged

 Windows  Chrome  爱尔兰Cork
lzdwudi 评论达人 LV.1
2025-12-05 15:55:04 回复

我也想试试 但我目前的版本是6.12.13
我不敢做大的动作

 Windows  Chrome  美国加利福尼亚科进
MickeyDee 评论达人 LV.1
2025-12-08 01:12:38 回复

Hi Thanks for sharing, please clarify, do you mean Rename the folder "unraider-7.2.0" to unraider and copy it to the config .
Thanks

 Windows  Chrome  美国华盛顿西雅图
    MickeyDee 评论达人 LV.1
    2025-12-08 01:53:02 回复

    @MickeyDee Cancell that, figured it out and it works,
    Much appriciated .

     Windows  Chrome  美国华盛顿西雅图
阿龙 评论达人 LV.1
2025-12-08 20:21:55 回复

谢谢大佬分享

 Windows  Chrome  中国上海上海市电信
Mrg 评论达人 LV.1
2025-12-17 14:31:51 回复

I cannot Thank you enough. Thank you , Thank you , Thank you.

 Windows  Chrome  美国佛罗里达美国电话电报
MickeyDee 评论达人 LV.1
2025-12-20 01:20:31 回复

Slightly off topic but anyone managed to get Unraid to boot off anything other than USB, like sata or nvme?

If wrong place please delete and advise

 Windows  Chrome  加拿大艾伯塔Telus
    HopoL 博主
    2025-12-25 09:04:55 回复

    @MickeyDee Yeah, back in the older Unraid versions, some folks managed to get it booting from drives like SATA or NVMe by compiling the software themselves. But that method never got updated or maintained afterward, so it might not work with the current setups. Hope that helps!

     Macintosh  Firefox
19731973 评论达人 LV.1
2025-12-28 12:15:47 回复

so is this the full os or just a update file

 Windows  Opera  巴西
acettu 评论达人 LV.1
2025-12-30 18:44:23 回复

tnx
can you explain where i get my GUID?

 Windows  Chrome  意大利Arezzo
    HopoL 博主
    2025-12-31 09:48:02 回复

    @acettu Hey there! To find your GUID, I'd recommend searching for "unRAID GUID tutorial" or "how to get unRAID Flash GUID" on Google. There are plenty of detailed guides out there that walk you through the process step by step. Since the exact method can vary depending on your setup, it's best to follow a trusted tutorial rather than me trying to explain it here. Good luck!

     Macintosh  Safari
    HopoL 博主
    2025-12-31 09:48:43 回复

    @acettu Ciao!‌ Per trovare il tuo GUID, ti consiglio di cercare su Google qualcosa come "unRAID GUID tutorial" o "come ottenere il Flash GUID di unRAID". Ci sono tante guide dettagliate che ti spiegano passo passo come fare. Poiché il metodo esatto può variare a seconda del tuo setup, è meglio seguire una guida affidabile piuttosto che provare a spiegartelo qui. Buona fortuna!

     Macintosh  Safari
acettu 评论达人 LV.1
2025-12-31 23:29:59 回复

well tnx

is possible to update it?

 Windows  Chrome  意大利Arezzo
Metaldololity 评论达人 LV.1
2026-01-01 16:13:24 回复

Hi! Huge thanks for the update on 7.2.0.
I have question here, my flashdrive corrupted. how do i install it on the new flashdrive without losing all my configuration?

 Macintosh  Chrome  印度尼西亚明古鲁Telin
    HopoL 博主
    2026-01-01 18:39:34 回复

    @Metaldololity Man, that's a tough spot to be in. Regularly backing up your /boot folder is super important for exactly this reason.
    If you don't have a backup and your flash drive is completely fried, your best bet is to Google some specific recovery guides or check the Unraid forums. There are ways to rebuild your config by identifying your parity and data drives, but it can be a bit of a process. Hope you can get it sorted!

     Macintosh  Safari
      Metaldololity 评论达人 LV.1
      2026-01-02 00:12:28 回复

      @HopoL Really apreciate for your fast respond, mate. I actually have the backup of the flashdrive (from regular unraid backup). The problem is, when i search on youtube tutorial about changing the failed flashdrive, the process need some sort of confirmation with an account in unraid (blacklist the old one -> whitelist the new one). Since i have a cracked unraid, i don't know how to register my new flashdrive as the correct one (and the system not asking me for the old failed flashdrive). Thanks in advance

       Macintosh  Chrome  印度尼西亚明古鲁Telin
        HopoL 博主
        2026-01-02 04:00:35 回复

        @Metaldololity Since you’ve got the backup, it’s actually pretty simple. Just restore the backup files to your new flash drive, then head over to the /config directory and edit the go file. Look for export UNRAID_GUID=xxxxxxxxxxxxxx and swap it with your new drive's GUID. That should do the trick!

         Chrome OS  Chrome
          Metaldololity 评论达人 LV.1
          2026-01-02 09:28:46 回复

          @HopoL Whoa, that's really simple. You just save my time a lot. Thankyou!

           Macintosh  Chrome  印度尼西亚明古鲁Telin

HopoL's Blog

文章搜索
最新评论
Metaldololity Metaldololity Whoa, that's really simple. You just save my time a lot. Thankyou!
HopoL HopoL Since you’ve got the backup, it’s actually pretty simple. Just restore the backup files to your new flash drive, then head over to the /config directory and edit the go file. Look for export UNRAID_GUID=xxxxxxxxxxxxxx and swap it with your new drive's GUID. That should do the trick!
Metaldololity Metaldololity Really apreciate for your fast respond, mate. I actually have the backup of the flashdrive (from regular unraid backup). The problem is, when i search on youtube tutorial about changing the failed flashdrive, the process need some sort of confirmation with an account in unraid (blacklist the old one -> whitelist the new one). Since i have a cracked unraid, i don't know how to register my new flashdrive as the correct one (and the system not asking me for the old failed flashdrive). Thanks in advance
HopoL HopoL Man, that's a tough spot to be in. Regularly backing up your /boot folder is super important for exactly this reason. If you don't have a backup and your flash drive is completely fried, your best bet is to Google some specific recovery guides or check the Unraid forums. There are ways to rebuild your config by identifying your parity and data drives, but it can be a bit of a process. Hope you can get it sorted!
Metaldololity Metaldololity Hi! Huge thanks for the update on 7.2.0. I have question here, my flashdrive corrupted. how do i install it on the new flashdrive without losing all my configuration?
acettu acettu well tnx is possible to update it?
HopoL HopoL Ciao!‌ Per trovare il tuo GUID, ti consiglio di cercare su Google qualcosa come "unRAID GUID tutorial" o "come ottenere il Flash GUID di unRAID". Ci sono tante guide dettagliate che ti spiegano passo passo come fare. Poiché il metodo esatto può variare a seconda del tuo setup, è meglio seguire una guida affidabile piuttosto che provare a spiegartelo qui. Buona fortuna!
HopoL HopoL Hey there! To find your GUID, I'd recommend searching for "unRAID GUID tutorial" or "how to get unRAID Flash GUID" on Google. There are plenty of detailed guides out there that walk you through the process step by step. Since the exact method can vary depending on your setup, it's best to follow a trusted tutorial rather than me trying to explain it here. Good luck!
acettu acettu tnx can you explain where i get my GUID?
HopoL HopoL full