unRAID NAS Server Pro 6.10.1 开心版
感谢 muziling ！！！
感谢 muziling ！！！
感谢 muziling ！！！
下载地址：
unRAIDServer-6.10.1-x86_64开心
https://mega.nz/file/ddQiXSiI#xkbb88mR0tJDTknxWwvHUf7koKJ8tbZv9cq-AcxRI0k
临时下载链接：
简单说明
1、开心最重要，开心方法看 config目录go文件
2、支持硬盘安装，启动硬盘必须为SATA类型，但会独占一块硬盘（即硬盘不能加入阵列使用），可以在vmware里安装测试
3、realtek网卡驱动替换成r8168 v8.050.02
4、2G内存可启动，太小会启动不起来
开心方法和硬盘安装方法见解压后的config目录go文件，引导盘符要为UNRAID
无缝升级方法，除了config目录，全部覆盖，config目录只覆盖3个文件：go, usb, BTRS.key
更新日志：
## Version 6.10.1 2022-05-21
### Management:
- startup: fix regression: support USB flash boot from other than partition 1
## Version 6.10.0 2022-05-07
### Base distro:
- aaa_base: version 15.0
- aaa_glibc-solibs: version 2.33
- aaa_libraries: version 15.0
- acl: version 2.3.1
- acpid: version 2.0.33
- apcupsd: version 3.14.14
- at: version 3.2.3
- attr: version 2.5.1
- avahi: version 0.8
- bash: version 5.1.016
- beep: version 1.3
- bin: version 11.1
- bind: version 9.16.27
- bluez-firmware: version 1.2
- bridge-utils: version 1.7.1
- brotli: version 1.0.9
- btrfs-progs: version 5.16
- bzip2: version 1.0.8
- ca-certificates: version 20220403
- celt051: version 0.5.1.3
- cifs-utils: version 6.14
- coreutils: version 9.0
- cpio: version 2.13
- cpufrequtils: version 008
- cracklib: version 2.9.7
- cryptsetup: version 2.4.3
- curl: version 7.83.1 (CVE-2022-22576 CVE-2022-27774 CVE-2022-27775 CVE-2022-27776 CVE-2022-27778 CVE-2022-27779 CVE-2022-27780 CVE-2022-27781 CVE-2022-27782 CVE-2022-30115)
- cyrus-sasl: version 2.1.27
- db48: version 4.8.30
- dbus: version 1.12.20
- dcron: version 4.5
- devs: version 2.3.1
- dhcpcd: version 9.4.1
- diffutils: version 3.8
- dmidecode: version 3.3
- dnsmasq: version 2.86
- docker: version 20.10.14 (CVE-2022-24769)
- dosfstools: version 4.2
- e2fsprogs: version 1.46.5
- ebtables: version 2.0.11
- eject: version 2.1.5
- elogind: version 246.10
- elvis: version 2.2_0
- etc: version 15.0
- ethtool: version 5.16
- eudev: version 3.2.11
- file: version 5.41
- findutils: version 4.8.0
- flex: version 2.6.4
- floppy: version 5.5
- fuse3: version 3.10.5
- gawk: version 5.1.1
- gdbm: version 1.22
- genpower: version 1.0.5
- getty-ps: version 2.1.0b
- git: version 2.35.3 (CVE-2022-24765)
- glib2: version 2.70.3
- glibc: version 2.33
- glibc-zoneinfo: version 2022a
- gmp: version 6.2.1
- gnutls: version 3.7.2
- gptfdisk: version 1.0.8
- grep: version 3.7
- gzip: version 1.12 (CVE-2022-1271)
- hdparm: version 9.63
- hostname: version 3.23
- htop: version 3.1.2
- icu4c: version 69.1
- inetd: version 1.79s
- infozip: version 6.0
- inih: version 53
- inotify-tools: version 3.20.11.0
- iproute2: version 5.16.0
- iptables: version 1.8.7
- iputils: version 20211215
- irqbalance: version 1.7.0
- jansson: version 2.14
- jemalloc: version 5.2.1
- jq: version 1.6
- json-c: version 0.15_20200726
- json-glib: version 1.6.6
- kbd: version 1.15.3
- keyutils: version 1.6.3
- kmod: version 29
- krb5: version 1.19.2
- lbzip2: version 2.5
- less: version 590
- libaio: version 0.3.112
- libarchive: version 3.6.1
- libcap-ng: version 0.8.2
- libcgroup: version 0.41
- libdaemon: version 0.14
- libdrm: version 2.4.109
- libedit: version 20210910_3.1
- libepoxy: version 1.5.9
- libestr: version 0.1.9
- libevent: version 2.1.12
- libfastjson: version 0.99.9
- libffi: version 3.3
- libgcrypt: version 1.9.4
- libgpg-error: version 1.44
- libgudev: version 237
- libidn: version 1.38
- libjpeg-turbo: version 2.1.2
- liblogging: version 1.0.6
- libmnl: version 1.0.4
- libnetfilter_conntrack: version 1.0.8
- libnfnetlink: version 1.0.1
- libnftnl: version 1.2.1
- libnl3: version 3.5.0
- libpcap: version 1.10.1
- libpciaccess: version 0.16
- libpng: version 1.6.37
- libpsl: version 0.21.1
- libseccomp: version 2.5.1
- libssh: version 0.9.6
- libssh2: version 1.10.0
- libtasn1: version 4.18.0
- libtirpc: version 1.3.2
- libtpms: version 0.9.0
- libunistring: version 0.9.10
- libunwind: version 1.6.2
- libusb: version 1.0.24
- libusb-compat: version 0.1.7
- libuv: version 1.41.0
- libvirt: version 8.2.0
- libvirt-php: version 0.5.6a
- libwebp: version 1.2.2
- libwebsockets: version 4.2.0
- libx86: version 1.1
- libxml2: version 2.9.14 (CVE-2022-29824)
- libxslt: version 1.1.35
- libzip: version 1.8.0
- lm_sensors: version 3.6.0
- lmdb: version 0.9.29
- logrotate: version 3.18.1
- lshw: version B.02.19.2
- lsof: version 4.94.0
- lsscsi: version 0.32
- lvm2: version 2.03.13
- lz4: version 1.9.3
- lzip: version 1.22
- lzo: version 2.10
- mc: version 4.8.27
- mcelog: version 180
- miniupnpc: version 2.1
- mpfr: version 4.1.0
- nano: version 6.0
- ncompress: version 5.0
- ncurses: version 6.3
- net-tools: version 20181103_0eebece
- nettle: version 3.7.3
- network-scripts: version 15.0
- nfs-utils: version 2.5.4
- nghttp2: version 1.46.0
- nginx: version 1.21.6
- nss-mdns: version 0.14.1
- ntfs-3g: version 2021.8.22
- ntp: version 4.2.8p15
- numactl: version 2.0.13
- oniguruma: version 6.9.7.1
- openssh: version 8.8p1
- openssl: version 1.1.1o (CVE-2022-1292)
- openssl-solibs: version 1.1.1o (CVE-2022-1292)
- p11-kit: version 0.24.1
- pam: version 1.5.2
- patch: version 2.7.6
- pciutils: version 3.7.0
- pcre: version 8.45
- pcre2: version 10.39
- php: version 7.4.29 (CVE-2021-21708)
- pixman: version 0.40.0
- pkgtools: version 15.0
- procps-ng: version 3.3.17
- pv: version 1.6.6
- qemu: version 6.2.0
- qrencode: version 4.1.1
- reiserfsprogs: version 3.6.27
- rpcbind: version 1.2.5
- rsync: version 3.2.3
- rsyslog: version 8.2102.0
- samba: version 4.15.7 (CVE-2021-44141 CVE-2021-44142 CVE-2022-0336 CVE-2021-44141 CVE-2021-441412 CVE-2022-0336)
- sdparm: version 1.12
- sed: version 4.8
- sg3_utils: version 1.47
- shadow: version 4.8.1
- smartmontools: version 7.3
- spice: version 0.15.0
- sqlite: version 3.37.2
- ssmtp: version 2.64
- sudo: version 1.9.9
- swtpm: version 0.7.3 (CVE-2022-23645)
- sysfsutils: version 2.1.0
- sysvinit: version 2.99
- sysvinit-scripts: version 15.0
- talloc: version 2.3.2
- tar: version 1.34
- tcp_wrappers: version 7.6
- tdb: version 1.4.6
- telnet: version 0.17
- tevent: version 0.11.0
- traceroute: version 2.1.0
- tree: version 1.8.0
- ttyd: version 20211023
- usbredir: version 0.8.0
- usbutils: version 014
- utempter: version 1.2.0
- util-linux: version 2.37.4
- vbetool: version 1.2.2
- vsftpd: version 3.0.5
- wayland: version 1.20.0
- wget: version 1.21.2
- which: version 2.21
- wireguard-tools: version 1.0.20210914
- wsdd2: version 20111022
- xfsprogs: version 5.13.0
- xxHash: version 0.8.1
- xz: version 5.2.5 (CVE-2022-1271)
- yajl: version 2.1.0
- zlib: version 1.2.12
- zstd: version 1.5.2
Included with GUI-mode:
- adwaita-icon-theme: version 40.1.1
- at-spi2-atk: version 2.38.0
- at-spi2-core: version 2.42.0
- atk: version 2.36.0
- cairo: version 1.16.0
- dbus-glib: version 0.112
- freetype: version 2.11.1
- fribidi: version 1.0.11
- gd: version 2.3.3
- gdk-pixbuf2: version 2.42.6
- graphite2: version 1.3.14
- gtk+3: version 3.24.31
- harfbuzz: version 3.2.0
- hicolor-icon-theme: version 0.17
- libtiff: version 4.3.0
- libxkbcommon: version 1.3.1
- pango: version 1.48.11
- shared-mime-info: version 2.1
- startup-notification: version 0.12
- appres: version 1.0.5
- dejavu-fonts-ttf: version 2.37
- editres: version 1.0.7
- encodings: version 1.0.5
- fontconfig: version 2.13.92
- freeglut: version 3.2.1
- glew: version 2.2.0
- glu: version 9.0.2
- libICE: version 1.0.10
- libSM: version 1.2.3
- libX11: version 1.7.3.1
- libXau: version 1.0.9
- libXaw: version 1.0.14
- libXcomposite: version 0.4.5
- libXcursor: version 1.2.0
- libXdamage: version 1.1.5
- libXdmcp: version 1.1.3
- libXevie: version 1.0.3
- libXext: version 1.3.4
- libXfixes: version 6.0.0
- libXfont: version 1.5.2
- libXfont2: version 2.0.5
- libXfontcache: version 1.0.5
- libXft: version 2.3.4
- libXi: version 1.8
- libXinerama: version 1.1.4
- libXmu: version 1.1.3
- libXpm: version 3.5.13
- libXrandr: version 1.5.2
- libXrender: version 0.9.10
- libXres: version 1.2.1
- libXt: version 1.2.1
- libXtst: version 1.2.3
- libXxf86dga: version 1.1.5
- libXxf86misc: version 1.0.4
- libXxf86vm: version 1.1.4
- libdmx: version 1.1.4
- libevdev: version 1.12.0
- libfontenc: version 1.1.4
- libglvnd: version 1.3.3
- libpthread-stubs: version 0.4
- libxcb: version 1.14
- libxkbfile: version 1.1.0
- libxshmfence: version 1.3
- listres: version 1.0.4
- mkfontscale: version 1.2.1
- mtdev: version 1.1.6
- sessreg: version 1.1.2
- setxkbmap: version 1.3.2
- transset: version 1.0.2
- xauth: version 1.1.1
- xcb-util: version 0.4.0
- xdpyinfo: version 1.3.2
- xdriinfo: version 1.0.6
- xev: version 1.2.4
- xf86-input-evdev: version 2.10.6
- xf86-input-keyboard: version 1.9.0
- xf86-input-mouse: version 1.9.3
- xf86-input-synaptics: version 1.9.1
- xf86-video-ast: version 1.1.5
- xf86-video-mga: version 2.0.0
- xf86-video-vesa: version 2.5.0
- xhost: version 1.0.8
- xinit: version 1.4.1
- xkbcomp: version 1.4.5
- xkbevd: version 1.1.4
- xkbutils: version 1.0.4
- xkeyboard-config: version 2.34
- xkill: version 1.0.5
- xload: version 1.1.3
- xlsatoms: version 1.1.3
- xlsclients: version 1.1.4
- xmessage: version 1.0.5
- xmodmap: version 1.0.10
- xorg-server: version 1.20.14
- xprop: version 1.2.5
- xrandr: version 1.5.1
- xrdb: version 1.2.1
- xrefresh: version 1.0.6
- xset: version 1.2.4
- xsetroot: version 1.1.2
- xsm: version 1.0.4
- xtrans: version 1.4.0
- xwd: version 1.0.8
- xwininfo: version 1.1.5
- xwud: version 1.0.5
- imlib2: version 1.7.1
- fluxbox: version 1.3.7
- slim: version 1.3.6
- vte3: version 0.50.2
- sakura: version 3.5.0
- xclock: version 1.0.9
- xterm: version 370
- hwloc: version 2.2.0
### Linux kernel:
- version 5.15.40-Unraid (CVE-2021-33909 CVE-2021-33910 CVE-2022-0847)
- patch: "drm/i915/gen11: Moving WAs to icl_gt_workarounds_init()"
- patch: "add-relaxable-rmrr-5_8_and_up.patch" modified for this kernel
- added features:
- several ACPI-related CONFIG settings
- CONFIG_TCG_TPM and associated TPM chip drivers
- CONFIG_NFS_V4: NFS client support for NFS version 4
- CONFIG_NFSD_V4: NFS server support for NFS version 4
- CONFIG_USB_RTL8152: Realtek RTL8152/RTL8153 Based USB Ethernet Adapters
- CONFIG_USB_NET_AQC111: Aquantia AQtion USB to 5/2.5GbE Controllers support
- CONFIG_USB4: Unified support for USB4 and Thunderbolt
- CONFIG_USB4_NET: Networking over USB4 and Thunderbolt cables
- CONFIG_DRM_I915_GVT: Enable Intel GVT-g graphics virtualization host support
- CONFIG_DRM_I915_GVT_KVMGT: Enable KVM/VFIO support for Intel GVT-g
- CONFIG_VFIO_MDEV: Mediated device driver framework
- CONFIG_VFIO_MDEV_DEVICE: VFIO driver for Mediated devices
- CONFIG_FTRACE: Tracers
- CONFIG_FUNCTION_TRACER: Kernel Function Tracer
- CONFIG_KPROBES: Kprobes
- CONFIG_DEBUG_KERNEL: Kernel debugging
- CONFIG_KALLSYMS_ALL: Include all symbols in kallsyms
- CONFIG_ISCSI_TCP: iSCSI Initiator over TCP/IP (per Community Member @ich777)
- CONFIG_GIGABYTE_WMI: Gigabyte WMI temperature driver
- BPF kernel options (user request):
- CONFIG_BPF_SYSCALL: Enable bpf() system call
- CONFIG_BPF_JIT: Enable BPF Just In Time compiler
- CONFIG_BPF_JIT_ALWAYS_ON: Permanently enable BPF JIT and remove BPF interpreter
- CONFIG_NET_CLS_BPF: BPF-based classifier
- CONFIG_NET_CLS_ACT: Actions
- CONFIG_NET_ACT_BPF: BPF based action
- CONFIG_IKHEADERS: Enable kernel headers through /sys/kernel/kheaders.tar.xz
- CONFIG_NET_SCH_SFQ: Stochastic Fairness Queueing (SFQ)
- CONFIG_NET_ACT_POLICE: Traffic Policing
- CONFIG_NET_ACT_GACT: Generic actions
- CONFIG_GACT_PROB: Probability support
- CONFIG_NET_SCH_INGRESS: Ingress/classifier-action Qdisc
- CONFIG_CGROUP_BPF: Support for eBPF programs attached to cgroups
- md/unriad: version 2.9.22
- fix: md_sync_limit was being ignored
### Management:
- better IPv6 suport
- diagnostics: add bz*.sha256 values
- diagnostics: Improved anonymization
- diagnostics: Anonymize mover
- diagnostics: better package listings in folders.txt
- diagnostics: do not anonymize 169.254.x.x addresses
- emhttp new defaults:
- root password required
- newly created shares not exported by default
- predefined 'flash' share not exported by default
- ssh, telnet: disabled by default
- NetBIOS disabled by default
- WSD enabled by default (and using newer 'wsdd2' package)
- Enhanced macOS interoperability enabled by default
- for 'domains' and 'system' shares, change 'Enable Copy-on-write' default setting from 'No' to 'Auto'
- change poll_attributes tunable default value from 30 min to 30 sec.
- emhttpd: add 'rootshare' reserved name
- emhttpd: fix regression: user shares should be enabled by default
- emhttpd: minimize information transmitted by UpdateDNS function
- emhttpd: use shfs ioctl to invalidate shfs cached share info when share cfg changes
- emhttpd: fix incorrect handling of unassigned device read/write counters
- emhttpd: fix sometimes wrong device name assigned to hotplugged unassigned devices
- emhttpd: fix btrfs-replace case
- emhttpd: fix btrfs pool device replace still showing 'missing'
- emhttpd: delete all PHP sessions when root password is changed (logs everyone out)
- emhttpd: correct device status handling for single-slot pools
- emhttpd: collapse multiple underscores within nvme /dev/disk/by-id symlinks to single underscore
- firefox: version 91.0.r20210823123856 (AppImage)
- mover: fix bug not moving shares with embedded spaces
- mover: append '.partial' suffix to filename when move in-progess
- rc.docker: fix startup network race condition
- rc.libvirt: Prevent Unraid from hanging when the array is stopped, while VMs are in paused or suspended state
- rc.libvirt: test the existence of a VM before adding it to the NAMES list
- rc.mcelog: mcelog added to base distro
- rc.nginx: change fastcgi_read_timeout from 120s to 640s
- rc.nginx: remove ttyd side-loading
- rc.nginx: support Lets Encrypt wildcard certs
- rc.nginx: support custom wildcard self-signed certs
- rc.nginx: self-signed cert subject OU change from "unRAID" to "Unraid"
- rc.nginx: ignore case in processing Subject field for custom certificates
- rc.nginx: remove default server block returning 404 for https if USE_SSL==no and no CA-signed cert
- rc.samba: disable SMB Multi Channel by default; add control to Settings/SMB Settings page
- rc.S: check bz file sha256 during initial boot
- shfs: fix bug where permissions being ingored ('default_permissions' was missing in mount command)
- sysctl: handle net.netfilter.nf_conntrack_count max exceeded (increase setting to 131072)
- ttyd: fix garbled text in local FireFox Termainl windows
- upgradepkg: do not upgrade if existing package is newer
- wsdd2: listen only on active interface by default (br0, bond0, or eth0)
- webgui: Integrate header UPC
- webgui: Add Apps link to install CA
- webgui: Add internal container reference
- webgui: Add new setting "Terminal font size"
- webgui: Add notification agent for Pushplus
- webgui: Add notification agent for ServerChan
- webgui: Add 'root' folder protection to filetree
- webgui: Add tracking after system shutdown
- webgui: Add vmxnet3 and e1000 into available NICs for VMs
- webgui: Added "User 'root'" reference on Management Access page
- webgui: Added notify when plugin fails to install
- webgui: Added: Cumulative parity check. This allows a parity check to be divided over multiple time windows.
- webgui: Adjusted row highlighting on main and shares page to better suit people with color impairment
- webgui: Allow CA to get all docker info without having to download icons if not present
- webgui: Allow all notification agents to send links
- webgui: Allow ruleset for local rules in rsyslog.conf
- webgui: Allow simultaneous log and console windows for containers
- webgui: Always show "WebUI" for user specified URLs
- webgui: BTRFS balance and scrub scheduler
- webgui: BTRFS balance: fix recommendation message when volume is empty
- webgui: Better array sync when multiple sessions are opened
- webgui: Better translation of docker container variables
- webgui: CSS minor corrections
- webgui: Change Dashboard Parity status to be invalid and not emulated.
- webgui: Change page switching to better suit Safari on mobile devices
- webgui: Change parity sync notification from error to notice level
- webgui: Changed header selection for better support of Android
- webgui: Check for flash offline / quick check on if it is corrupted
- webgui: Cleanup styles folder
- webgui: Compress too long share names in dropdown menus
- webgui: ContextMenu: added option "button": defaults to "left" (current behavior), other options are "right" and "both"
- webgui: Convert notify polling to Nchan
- webgui: Create favicon.ico
- webgui: Create syslog entry when user logs out
- webgui: Dashboard: add CPU and NETWORK chart
- webgui: Dashboard: fix bar color when disk thresholds are disabled
- webgui: Dashboard: separate cpu details and graph view
- webgui: Delete DockerRepositories.page
- webgui: Device_list replace .png icon with font icon
- webgui: Diagnostics fix plugin deprecated max version error
- webgui: Diagnostics: Add share summary
- webgui: Diagnostics: Add share summary
- webgui: Diagnostics: Include current plugin versions
- webgui: Diagnostics: Remove lines from go containing passwords etc
- webgui: Diagnostics: Revamp anonymization
- webgui: Diagnostics: add DHCP log
- webgui: Diagnostics: add check for DNS Rebinding Protection
- webgui: Diagnostics: add url details
- webgui: Diagnostics: privatize routable IPs
- webgui: DisplaySettings: add "showBannerGradient"
- webgui: Do not highlight false positive ERST error
- webgui: Docker page loading improvements
- webgui: Docker settings: suppress browser presets
- webgui: Docker utilization warning only when image file
- webgui: Docker: Add Network / Privacy Category
- webgui: Docker: Add crypto as a category
- webgui: Docker: Do not update installed user templates
- webgui: Docker: Fix incorrect caching when deleting / recreating image
- webgui: Docker: Handle edge case involving browser back button when within CA in certain unlikely circumstances
- webgui: Docker: Ignore icon references to default question mark
- webgui: Docker: Only save templates as v2
- webgui: Docker: Silence PHP errors when editing a template if corruption exists
- webgui: Docker: Support CA tag
- webgui: Docker: Support ReadMe in context menus
- webgui: Docker: add description to all custom networks
- webgui: Docker: add route for remote WireGuard access
- webgui: Docker: add route for remote WireGuard access:
- webgui: Docker: add route for remote WireGuard access:
- "Host access to custom networks" must be enabled to allow access
- Containers with network 'br0' can be remotely accessed by WireGuard without the need to configure static routes on the home router (gateway)
- webgui: Docker: add time unit in settings
- webgui: Docker: add wireguard description in network selection
- webgui: Docker: compress too long author names
- webgui: Docker: fix GUI may hang when multiple screens are opened
- webgui: Docker: fix overlapping container ID display
- webgui: Docker: fix spinner will not disappear after attempting to uninstall a non-existent container
- webgui: Docker: fixed filetree sometimes not visible
- webgui: Docker: fixed header display causes gap
- webgui: Docker: fixed list display in fixed view mode
- webgui: Docker: fixed template removal when no containers exist
- webgui: Docker: make popup window fit in browser window
- webgui: Docker: optimized contextmenu
- webgui: Docker: process bash ANSI colors in web log display
- webgui: Docker: remove close button in popup windiow
- webgui: Docker: translation optimization
- webgui: Docker: update window uses color of selected theme
- webgui: Edit/Add Container: Fix browser console error
- webgui: Enable/Disable SMART extended test depending on spin down delay setting
- webgui: Error checking etc on ports for syslog server
- webgui: Escape double quotes in text input submit
- webgui: Expand file type icon selection
- webgui: Expand ipaddr() with protocol: protocol defaults to ipv4 in case of ipv4 + ipv6
- webgui: Fix CPU model sometimes not present
- webgui: Fix PHP error when calculating balance level
- webgui: Fix corruption check after a New Config is issued
- webgui: Fix missing csrf-token in Notify
- webgui: Fix monitor false positives
- webgui: Fix network bonding display
- webgui: Fix pools display on Main page when empty pool exists
- webgui: Fix regression error for themes auzre & gray
- webgui: Fix side bar of themes azure/gray in firefox
- webgui: Fix: Improved DNS Rebinding checks
- webgui: Fixed PHP errors for share and disk calculations
- webgui: Fixed balance/scrub schedule not saved when device name has "-" in it
- webgui: Fixed comments field only for selected disks
- webgui: Fixed parity duration + speed when paused/resumed
- webgui: Fixed smart temperature settings sometimes not possible
- webgui: Fixed: VM 9p add share issue
- webgui: Fixed: buttons not working in device info when no device is present
- webgui: Fixed: missing samesite attribute in cookies
- webgui: Fixed: parity history sometimes wrongly processed
- webgui: Fixed: race condition when array is stopped and device assignments are changed
- webgui: Fixed: specific disk settings for pool devices only
- webgui: Fixed: speed calculation of parity check
- webgui: Fixed: spinner stays visible after docker command
- webgui: Fixes and enhancements in Browse function
- webgui: Font files update:
- Adjust css settings
- Cleanup font files, use only woff format
- Restore clear-sans font
- Update bitstream font
- bitstream --> source code pro
- clear-sans --> source sans pro
- webgui: Force creation of root password
- webgui: Highlight selected row when hovering over array or shares
- webgui: Improved background process detection and handling
- webgui: Improved format of stale and error plugin pages
- webgui: Include links in email and Discord agent notifications
- webgui: Let setting "showBannerGradient" default to "yes"
- webgui: Limit popup window width on ultrawide monitors
- webgui: Log docker icon download failures
- webgui: Lower update frequency of monitor function to better suit mobile devices
- webgui: Main page - lower table update frequency for better responsiveness of links
- webgui: Make WireGuard trademark visible on "full" page
- webgui: Make links in help text standout (red)
- webgui: Management: fix ports in use check
- webgui: Miscellaneous updates and fixes
- webgui: Move Start button below encryption field
- webgui: NFS: fix copying of hostList after READ operation
- webgui: Nchan: Use multiplexed channels and add error reporting
- webgui: Only allow png files to be uploaded as user image
- webgui: Open terminal window with dynamic size
- webgui: Parity check: allow spinup/spindown when operation is paused
- webgui: Parity check: re-introduce Done button when finished
- webgui: Parity operation enhancements:
- Add disk clear action
- Add parity operation action to history view
- Added "size" column to parity history
- CSS adjustment in SMART attributes
- Correct calculations for data-rebuild smaller than parity
- Separate Parity-Sync and Data-Rebuild as individual actions
- Show additional buttons in Array Stopped state
- Textual enhancements
- Use Nchan updates for copying/clearing progress
- webgui: Parity: shown duration time excluding idle time
- webgui: Plugin manager: fix branch select gets unnecessary disabled
- webgui: Plugins page loading improvements
- webgui: Proactive script security hardening
- webgui: Relax SMART detection logic
- webgui: Relax update frequency a bit
- webgui: Remove Nchan error detection (Rely on the automatic reconnect of Nchan to re-establish connections when communication is slow)
- webgui: Remove deprecated font extensions: eot, svg, ttf
- webgui: Replace polling scripts with event driven Nchan interface
- webgui: Revert back to default capitalization of device names
- webgui: Revised filedrop.js
- webgui: Right-clicking or long-clicking a menu item should open the selected menu
- webgui: SSH authorized keys UI
- webgui: Set Main page update frequency to 1s for better support of mobile devices
- webgui: Shares: fix wrong size computation
- webgui: Show IP on VM Manager VM Page
- webgui: Show management access and shares access groups for users
- webgui: Show warning when javascript is disabled
- webgui: Sign-in required to provision/renew Unraid LE SSL certificate
- webgui: Silence PHP error on syslinux page if flash drive is missing
- webgui: Support future T2FA
- webgui: Support multi-language in filetree display
- webgui: Suppress IPv6 anycast addresses in routing table
- webgui: Suppress non-relevant IPv6 routes in routing table
- webgui: System devices additions
- webgui: System info: fix translation
- webgui: Translation support (Unraid.net)
- webgui: Translations: fix creation of empty sessions
- webgui: Update Credits.page
- webgui: Update DashStats.page
- webgui: Update FileTree.php
- webgui: Update GUI with latest helptext
- webgui: Update Outlook/Hotmail smtp settings
- webgui: Update alert text
- webgui: Update css files to use woff and woff2 formats only
- webgui: UpdateDNS to prefer IPv4 first and then IPv6
- webgui: Updated bitstream font to support more languages
- webgui: Updated help text for Display settings and Docker
- webgui: Use background checking for flash corruption
- webgui: Use https for internet connectivity check
- webgui: Use tabbed view for device information page
- webgui: Use ttyd for logging windows
- webgui: VM Manager: add virtio-win-0.1.208.iso download link
- webgui: VM Manager: added Windows 11 template and OVMF TPM
- webgui: VM editor style update
- webgui: VM: fix missing path selection (for GPU firmware file)
- webgui: VMs: automatically update virtio-win iso list
- webgui: VMs: optimized contextmenu
- webgui: Validate WebGUI ports before applying
- webgui: Validate destination of VirtIO ISO downloads
- webgui: When viewing source, identify which .page file is responsible
- webgui: WireGuard integrated
- webgui: WireGuard updates:
- webgui: WireGuard updates:
- Add tunnel routing for docker containers
- Automatically make the WG tunnel available to containers (custom network)
- Make import config file of VPN providers more robust.
- VPN tunneled access for docker
- VPN tunneled access for system
- webgui: WireGuard: Add warning when tunnel deletion fails
- webgui: WireGuard: Introduce new network modes:
- webgui: WireGuard: add logic to recreate networks after reboot
- webgui: WireGuard: fixed proper handling of ipv4 + ipv6 tunnels
- webgui: WireGuard: preset peer DNS server with "Remote tunneled access"
- webgui: WireGuard: use kill switch when tunnel inactive
- webgui: WireGuard: user nginx settings and unraid.net api
- webgui: WireGuard: warn when directly connected with public IP
- webgui: Wireguard: fix import function to accept all keys
- webgui: Wireguard: make management interface seletable:
- webgui: Wireguard: make management interface seletable:
- Defaults to eth0 - future expansion
- webgui: Wireguard: strip ListenPort from file input:
- ListenPort must be unique, let WG generate a random local port instead
- webgui: css scrollbar enhancements
- webgui: diagnostics: fix: anonymize myunraid.net urls
- webgui: dockerMan Security: Remove HTML tags from Config elements
- webgui: dockerMan: remove HTML from descriptions
- webgui: fix: password lockouts not being cleared properly
- webgui: fix: remove reauthentication msg from email notifications
- webgui: improve: Highlight selected row when hovering over array or shares
- webgui: jQuery: version 3.6.0
- webgui: present CA-signed certificate subject as a link
- webgui: privatize host in diagnostics
- webgui: refactor UpdateDNS.php: anonymize verbose output by default, other improvements
- webgui: remove 'My Servers' skeleton page
- webgui: require sign in to provision cert
- webgui: support simultanious LAN SSL with self-signed cert and DNS-based SSL with Lets Encrypt cert
- webgui: various Multi-language corrections
文章目录
关闭
共有 0 条评论