提醒：本文最后更新于2024-08-02 14:34，文中所关联的信息可能已发生改变，请知悉！
感谢 knat 分享！！！
感谢 zeroqi2008 告知 ！！！
下载地址：
Qnap QTS GPL Kernel 4.2.8 内核编译@knat
正文完
【转帖】威联通 Qnap QTS GPL Kernel 4.2.8 内核和驱动编译
转载说明：除特殊说明外本站文章皆由CC-4.0协议发布，转载请注明出处。
评论（3 条评论）
文章搜索
最新评论
HopoL
Since you’ve got the backup, it’s actually pretty simple. Just restore the backup files to your new flash drive, then head over to the /config directory and edit the go file. Look for export UNRAID_GUID=xxxxxxxxxxxxxx and swap it with your new drive's GUID. That should do the trick!
Metaldololity
Really apreciate for your fast respond, mate. I actually have the backup of the flashdrive (from regular unraid backup). The problem is, when i search on youtube tutorial about changing the failed flashdrive, the process need some sort of confirmation with an account in unraid (blacklist the old one -> whitelist the new one). Since i have a cracked unraid, i don't know how to register my new flashdrive as the correct one (and the system not asking me for the old failed flashdrive). Thanks in advance
HopoL
Man, that's a tough spot to be in. Regularly backing up your /boot folder is super important for exactly this reason.
If you don't have a backup and your flash drive is completely fried, your best bet is to Google some specific recovery guides or check the Unraid forums. There are ways to rebuild your config by identifying your parity and data drives, but it can be a bit of a process. Hope you can get it sorted!
Metaldololity
Hi! Huge thanks for the update on 7.2.0.
I have question here, my flashdrive corrupted. how do i install it on the new flashdrive without losing all my configuration?