UBNT固件改MAC批量生成工具1.9

4,207 views次阅读
没有评论

提醒:本文最后更新于2025-05-13 10:26,文中所关联的信息可能已发生改变,请知悉!

关于改MAC
00156D开头不要改,改了开头以后是无法升级固件的, 用16进制软件改MAC是不能正常启动的,还要一起改验证码才可以。

珍藏一个 批量改 MAC 的工具 方便以后使用

UBNT固件改MAC批量生成工具1.9

UBNT固件改MAC批量生成工具1.9

 

解压密码

hopol.cn

 

正文完
 0
HopoL
版权声明:本站原创文章,由 HopoL 于2015-02-24发表,共计117字。
转载说明:除特殊说明外本站文章皆由CC-4.0协议发布,转载请注明出处。
评论(没有评论)

HopoL's Blog

文章搜索
最新评论
19731973 19731973 so is this the full os or just a update file
HopoL HopoL Yeah, back in the older Unraid versions, some folks managed to get it booting from drives like SATA or NVMe by compiling the software themselves. But that method never got updated or maintained afterward, so it might not work with the current setups. Hope that helps!
MickeyDee MickeyDee Slightly off topic but anyone managed to get Unraid to boot off anything other than USB, like sata or nvme? If wrong place please delete and advise
Mrg Mrg I cannot Thank you enough. Thank you , Thank you , Thank you.
阿龙 阿龙 谢谢大佬分享
MickeyDee MickeyDee Cancell that, figured it out and it works, Much appriciated .
MickeyDee MickeyDee Hi Thanks for sharing, please clarify, do you mean Rename the folder "unraider-7.2.0" to unraider and copy it to the config . Thanks
lzdwudi lzdwudi 我也想试试 但我目前的版本是6.12.13 我不敢做大的动作
wice222 wice222 archive is demaged
tstUser01 tstUser01 Thanks for sharing!