识别HG255D是不是电信原版uboot

5,998 views次阅读
没有评论

提醒:本文最后更新于2025-05-13 10:17,文中所关联的信息可能已发生改变,请知悉!

分辨HG255d uboot 是原版 还是修改版,其实很容易。

 

1. 设置本地连接为 192.168.1.100 mask 255.255.255.0 网关不填,DNS不用填写,网线与hg255d连接好,保持机器关闭状态。

识别HG255D是不是电信原版uboot

 

2. 先在浏览器输入 http://192.168.1.1/upload.html,然后按住路由的reset键并接通电源,保持reset按住,浏览器不停刷新这个地址,大约几秒左右就可以看到如图所示的界面:

识别HG255D是不是电信原版uboot

 

3. 能看到上面界面的就是电信原版uboot,刷新出不来这界面的就是改版的uboot。

4. 最后大家可以去试试这方法,看看自己机器的uboot到底改版了没有。

正文完
 0
HopoL
版权声明:本站原创文章,由 HopoL 于2015-02-24发表,共计284字。
转载说明:除特殊说明外本站文章皆由CC-4.0协议发布,转载请注明出处。
评论(没有评论)

HopoL's Blog

文章搜索
最新评论
HopoL HopoL Yeah, back in the older Unraid versions, some folks managed to get it booting from drives like SATA or NVMe by compiling the software themselves. But that method never got updated or maintained afterward, so it might not work with the current setups. Hope that helps!
MickeyDee MickeyDee Slightly off topic but anyone managed to get Unraid to boot off anything other than USB, like sata or nvme? If wrong place please delete and advise
Mrg Mrg I cannot Thank you enough. Thank you , Thank you , Thank you.
阿龙 阿龙 谢谢大佬分享
MickeyDee MickeyDee Cancell that, figured it out and it works, Much appriciated .
MickeyDee MickeyDee Hi Thanks for sharing, please clarify, do you mean Rename the folder "unraider-7.2.0" to unraider and copy it to the config . Thanks
lzdwudi lzdwudi 我也想试试 但我目前的版本是6.12.13 我不敢做大的动作
wice222 wice222 archive is demaged
tstUser01 tstUser01 Thanks for sharing!
saisu saisu how to install from scratch for noobs like me please :D What is GUID ??